Torbal AGS100 250C PRO Manual - Manual (Page 16)

16
8.5. Sampling Interval
1. Use the “<>” navigation key to select Sampling Interval and press ENTER.
2. Use the numeric keys to enter the desired Sampling Interval in seconds. The maximum time is 180
seconds. Once the desired Time Interval has been entered, press the ENTER key to confirm the
entry.
8.6. Drying Time
1. Use the “<>” navigation key to select Drying Time and press the ENTER key. Drying Time is
specified in the following format: hh/mm/ss.
2. Use the numeric keys to enter the desired drying time. Press the ENTER key to advance between
fields.
3. Once the desired time has been entered, press the ENTER key to confirm the entry.