Canon IMAGERUNNER 2230 - Manual (Page 293)

Specifying Report Settings 7-3
7
Pr
in
ting Co
mmunica
ti
on Repo
rt
s
Specifying Report Settings
You can specify how various reports are printed.
NOTE
Reports can be printed only if 11" x 17", LGL, LTR, or LTRR paper (plain, recycled, or
color paper) is loaded in the paper sources whose settings in Fax in Drawer Eligibility For
APS/ADS in Common Settings (from the Additional Functions screen) are set to 'On'.
(See Chapter 4, "Customizing Settings," in the Reference Guide.)
TX Report
The TX Report enables you to check whether documents were sent correctly to
their intended destinations. A TX Report can be printed automatically after the
documents are sent. You can also set the machine to print a TX Report only when a
transmission error occurs, and adjust the TX Report setting to print the first part of
the document as part of the report to remind you of the document's contents.
NOTE
• For more information on the TX Report, see "TX Report/Error TX Report," on p. 9-2.
• The default settings are:
1
Press (Additional Functions)
➞ [Report Settings].
- TX Report:
- Report With TX Image: For Error Only
On