Report and list samples, Tx report/error tx report, Report and list samples -2 – Canon IMAGERUNNER 2230 User Manual
Page 326: Tx report/error tx report -2
Report and List Samples
9-2
9
App
end
ix
Report and List Samples
NOTE
The fax numbers and addresses used in these sample reports are fictitious.
TX Report/Error TX Report
This report indicates items, such as the fax number of the party to which you sent
documents, the result of communication, and other information, to enable you to
check whether the documents were sent correctly to the intended destination.
You can set whether to automatically print a TX Report after sending documents.
(See "TX Report," on p. 7-3.)
NOTE
•
You can also print a TX Report with an image of the sent original attached to it. (See "TX
Report," on p. 7-3.)
•
The default setting is 'For Error Only'.
■ REPORT NAME
When the document transmission is completed successfully, a "TX Report" is printed.
When a send error occurs, an "Error TX Report" is printed.
■ MESSAGE
A message describing the transmission result is printed.