B&C Technologies DI-475 Industrial - Manual (Page 11)

B. LOCATION REQUIREMENTS
The model DA-475 dryer requires 20-inches and 20-inches of space on each side of the
dryer and 24-inches of space behind the unit for ease of maintenance. A minimum
of 20-inches must be allowed between the top of machine dryer the ceiling The dryer must
be leveled for proper operation. If shimming is required put metal shims, which are the same
size as the base feet under the base feet. The dryer must be lagged to the floor.
IMPORTANT: Dryer should be located where a minimum amount of
exhaust duct will be necessary.