B&C Technologies DI-475 Industrial User Manual
Page 5
8. Remove articles from the dryer as soon as the drying cycle has been completed.
WARNING:
Articles left in the dryer after the drying and cooling cycles
have been completed can create a fire hazard.
9. Do not operate steam dryers with more than 125 PSI steam pressure. Excessive
steam pressure can damage steam coil and / or harm personnel.
10. Replace leaking flexible steam hoses or other steam fixtures immediately. Do not
operate dryer with leaking flexible hoses. Personal injury may result.
11. Read and follow all caution and direction labels attached to dryer.
12. DO NOT operate steam dryers with more than 125 PSI steam pressure. Excessive
steam pressure can damage steam coil and or harm personnel.
13. Replace leaking flexible steam hoses or other steam fixtures immediately. Do not
operate dryer with leaking flexible hoses. Personal injury may result.
14. Read and follow All caution and direction labels attached to dryer.
WARNING: YOU MUST DISCONNECT and LOCKOUT THE ELECTRIC SUPPLY
and THE GAS SUPPLY or THE STEAM SUPPLY BEFORE ANY
COVERS or GUARDS ARE REMOVED FROM THE MACHINE TO ALLOW
ACCESS DOR CLEANING, ADJUSTING, INSTALLATION, or TESTING OF ANY
EQUIPMENT per OSHA
(Occupational Safety and Health Administration) STANDARDS.