B&C Technologies PF Series - Manual (Page 11)

Chapter 3
Introduction
The PF Series folders are suitable for folding a large variety of textiles. Cotton, terry, and other
fabrics can be folded, sized up to 1.8m x 1.5m (72 x 60 inches).
The PF Series folders can make lateral and cross-folds. The machine is capable of 1 lateral and 2
cross-fold stations.
Lateral folding is done with a template, whose width can be adjusted gradually in order to perform
1/2, 1/3 or 1/4 folds. 1/2 folding is not recommended because the overlap is strongly influenced
by the operator feeding the goods: The parts must be placed exactly at the center of the input belts.
In the crossfolding stations (folding crosswise to the running direction), textiles can also be folded
1/2, 1/3, 1/4, folded at a fixed size, or not folded at all (bypass). After folding, the textiles are
transported to the stacker. The PF-3 allows stacking the pieces in 3 positions according to their
length or type, while the PF-1 stacks all folded goods in a common stack.
The machine is equipped with a microprocessor control which is operated by means of a panel
with a touch screen display. 100 different folding programms can be stored.
3.1 Customer Service
For technical assistance:
In the United States
Phone: (850)-249-2222
FAX: (850) 249-2226
e-mail: [email protected]
Web: www.bandctech.com
7