B&C Technologies PF Series - Manual (Page 38)

These values can be changed minimally to adjust the overlapping and the folding for different
fabric qualities. If a certain folding length is required, an exact end length can be acquired with
fixed length: For a fold with fixed length leading edge the value in millimetres has to be entered
plus 10000, from trailing edge plus 20000.
10.8 Endurance Run
The endurance run is needed to set up the machine. The machine simulates all movement without
any pices running through (pices cannot be folded during this test run.) This function has been
activated in programm number 48 (parameter 85).
34