B&C Technologies PF Series - Manual (Page 41)

Figure 11.2: Ski programming
8. Fine adjustements of the first crossfold: In this crossfold is built-in a blowtube and a knife.
The duration of the blowtube (parameter 13) and of the knife (parameter 16) can be set (in
milliseconds). Value 0 means that this function is disabled.
Figure 11.3: First Crossfold Adjustment
9. Fine adjustements of the second crossfold: In this crossfold is built-in a blowtube and a knife.
The duration of the blowtube (parameter 14) and of the knife (parameter 17) can be set (in
milliseconds). Additionaly the duration of the leading edge blowtube can be set (parameter
20). Value 0 means the respective function is disabled.
37