B&C Technologies PF Series - Manual (Page 39)

Chapter 11
Programming Example
The following is a brief example outlining the creation or modification of your own folding pro-
grams.
First consider how the goods will be fed into the machine and how each fold should be made.
Procedure:
1. On the main page choose ’Settings’, enter a password (if needed) and choose ’Program’.
Select the desired program number.
2. Longitudinal fold: Measure the width of the textile (0.9 m in the example). The required
template width is 1/3, which means 300 mm. Select Parameter 1 and enter value 4 (see
chapter ’Program specific parameters’).
3. 1. Crossfold: Select parameter 10 and enter 666 (2/3 of 1000).
4. 2. Crossfold: Select parameter 11 and enter 500 (1/2 of 1000).
5. Set pile height: Adjust the values of parameters 40 - 42 (for stacker A - C).
6. Test folding: You have entered the most important values, (the folding parameters) and you
can continue with the fine adjustment.
7. Fine adjustment of the longitudinal (French) fold: Duration and delay of the skis. From the
drawing you see which parameters are appropriate for which movements. (Circles mean
delay, arrows movement respective durations. All times are set in milliseconds).
35