Hit Products LogicPLUS S 42/128 - Manual (Page 12)

LogicPLUS-S Two-Wire Controller
12
12
Position 2 | | Valve Run Times | | Function Button-Pre Wet Function Button-Fertigation
Set Valve Run Times:
Use set 1 to choose the program, use set 2 to choose the valve number, use set 3 to set hours, use set
4 to set minutes. Input the total irrigation run time desired for each valve, including pre wet and fertiga-
tion time.
Pre Wet and Fertigation option:
Press Function Button, the display will now be the same, except with the following changes, a “P” will
show in front of Hours. Use set 3 or 4 to set amount of hours and minutes for the pre-wet time. Press
Function Button, again the display will stay the same except for a “F” that will show in front of hours,
use sets 3 or 4 to set the amount of hours and minutes for fertigation.
definitions:
Pre-Wet will run concurrently at the start of the valve run time.
Position 2