Hit Products LogicPLUS S 42/128 - Manual (Page 37)

37
LogicPLUS-S Two-Wire Controller 37
Rain Switch Connections
Normally Closed
Contact Wire
NOTE: Dry Contact
DO NOT APPLY POWER
MINI CLICK TYPE
COMMON WIRE
RAIN SWITCH CONNECTIONS
After the Rain switch connections are complete
turn the dial to position 11 use set 3 arrow to
change the display from Rain/Off to Rain/On
Note: This step must be performed to acknowledge
a Rain Sensor.
Note: Turning the display from Rain/On to Rain/Off
may be used to override the Rain Sensor.
See Dial Position 11 in the Programming Instructions.
LOGIC PLUS - S RAIN OFF SWITCH CONNECTION DIAGRAM
LogicPlus-S RAin OFF SWiTCh COnneCTiOn diAGRAM
Note: Dry Contact
dO nOT APPLy POWeR
Normally Closed
Contact Wire
MINI CLICK TYPE
COMMON
WIRE