CANOGA PERKINS L351 10/100BASE Media Converter - Manual (Page 25)

EdgeAccess Universal Chassis System
L351 10/100BASE Media Converter 4-1
Chapter 4
Management - VT100
If the L351 is installed in a UCS1000 or UCS1002 chassis, or if the system includes a DMM and a
CIM, or if the L351 is in a Model 1020 enclosure, you can manage the system through VT100
Terminal Emulation, which is accessible by a Telnet session, HyperTerminal or similar terminal
emulation software, a standard SNMP network manager, and CanogaView.
4.1 VT100 Terminal Emulation
Connect the VT100 terminal emulation session to the DMM used in the UCS 1000 or 1002 chassis or
to the BAM or Model 1020 enclosure. You cannot manage an L351 in a Model 1030 enclosure.
For details on the DMM, see the Model 1500 Domain Management Module User Manual (for
UCS 1000) or Model 1502 Domain Management Module User Manual (for UCS 1002).
Setting up the VT100 session depends on which connection, serial port or Ethernet, you have
available for access to the VT100 management program. Canoga Perkins suggests that you use
HyperTerminal for your first session. You must set up TCP/IP for the DMM before you can use
Telnet; for details, see the manual for the DMM.
4.2 PC Configuration for Terminal Operation
These steps briefly describe how to set up your PC for a terminal connection. For details on using
Windows, see your Windows documentation.
1. Turn on your PC.
2. Select Start>All Programs>Accessories, Communications, and click HyperTerminal.
3. In the Connection Description dialog box, enter a name for the connection to the system,
select an icon, and click OK.
4. In the Connect To dialog box, select the COM1 port from the Connect Using dropdown menu
and click OK.
5. In the COM1 Properties dialog box, ensure the following settings:
• Bits per second: 19200 bps
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: None
6. Click Apply, and then click OK. The HyperTerminal will connect to the system.
7. Select the Properties button from the HyperTerminal window or dialog box.
8. In the L351 HyperTerminal window or dialog box, select the Settings tab.
9. Select VT100 from the Emulation dropdown menu and click OK.