CANOGA PERKINS L351 10/100BASE Media Converter - Manual (Page 46)

EdgeAccess Universal Chassis System
4-22 L351 10/100BASE Media Converter
The Aux IP can be placed on any subnet and assigned any valid VLAN ID. By using the
Inband Auxiliary Port setting, the user can choose whether the entity is isolated to the User
Port only, to the Extension Port only, or if it presents itself on both ports simultaneously. The
user will also be able to shut off the entity by setting the Inband Auxiliary Port setting to No
Ports Allowed.
1. From the IP/SNMP Configuration menu type 4 and press <Enter>.
2. At the Trap Remote Auxiliary IP Configuration screen, type 1 to add an IP address and/or
subnet mask, 2 to choose an Inband port, 3, to enable or disable VLAN tagging, and 4 to
assign a VLAN ID number, and then follow the prompts at the bottom of the screen.
3. To return to the IP/SNMP Agent Configuration menu, press <Esc>.
4. To return to the System Configuration menu, press <Esc>.
Figure 4-20. Remote Auxiliary IP Configuration screen
--------------REMOTE AUXILIARY IP CONFIGURATION-------------
1) Auxiliary IP Address 000.000.000.000
Auxiliary Subnet Mask 255.255.255.000
2) Inband Auxiliary Port Both Ports
3) Auxiliary VLAN Tagging Disabled
4) Auxiliary VLAN Number 0
Select [1-4]:
--------------------------Messages--------------------------