CANOGA PERKINS L351 10/100BASE Media Converter - Manual (Page 55)

EdgeAccess Universal Chassis System
L351 10/100BASE Media Converter 4-31
4.6 Diagnostics Menu
Use the Diagnostics menu for troubleshooting the L351. You can view current loopback conditions
and set up loopback. See Figure 4-26. For details about using loopback, see Chapter 3. To use the
Diagnostics, follow these steps:
1. From the Main Menu, type 2, Diagnostics, and press <Enter>. The Diagnostics menu appears.
2. Type the number for the test option you want, and press <Enter>.
3. When you finish running diagnostic tests, press <Esc> to return to the Main Menu.
Figure 4-26. Diagnostics Menu
4.6.1 Loopback Setup
Use the Loopback Setup report and menu to view current loopback conditions and set up loopback for
troubleshooting the L351. See Figure 4-27 and Table 4-11. For details about using loopback, see
Chapter 3. To run a loopback test, follow these steps:
1. From the Diagnostics menu, type 1 , Loopback Setup, and press <Enter>. The Loopback
Setup screen appears.
2. Type the number for the loopback option you want to set, press <Tab> to highlight the
Remote column if needed, press <Space> to cycle through the options, and press <Enter>.
3. When you finish running Loopback, press <Esc> to return to the Diagnostics menu.
---------------------------------DIAGNOSTICS--------------------------
1) Loopback Setup
2) Remote Latency/Jitter Test
3) Remote Connectivity Loss Detection
Select [1 3]:
-------------------------------Messages-------------------------------