CANOGA PERKINS L351 10/100BASE Media Converter - Manual (Page 31)

EdgeAccess Universal Chassis System
L351 10/100BASE Media Converter 4-7
4.3.3 Login Menu
The first screen is the Login Menu. If this is your initial setup and no password has been set, type
admin at the Login Username prompt and press <Enter>, then type admin at the prompt for the
password and press <Enter>. Otherwise, type your username and press <Enter>, then type your
password and press <Enter>.
4.3.4 DMM Main Menu
If you are using a DMM, after you log in, the Main Menu for the DMM appears. This is the main
management screen for the DMM. For details on all menu options, see the Model 1500 Domain
Management Module Users Manual (for UCS 1000) or Model 1502 Domain Management Module
Users Manual (for UCS 1002). From this screen, you can access the L351 by either of two methods.
To reach the L351 directly, follow these steps:
a. Type 4, Manage or access a specific Module, and press <Enter>.
b. Type the slot and chassis numbers with a slash, such as 1/4 for chassis 1, slot 4, and then
press <Enter>.
c. At the Module Menu, type 4 , Access User Interface, then press <Enter> to reach the Main
Menu screen for the L351.
To reach the chassis, and then select the L351, follow these steps:
a. Type 3 , Manage or access a specific Chassis, and press <Enter>, press <Space> to cycle
between the chassis in the domain, and then press <Enter> to select the chassis.
b. At the Chassis Management screen, press <Space> to cycle to the slot number for the L351,
then press <Enter> to reach the Main Menu screen for the L351.
Note: In a UCS 1000 chassis, slots in the BAM appear as A and B for the slot that the BAM is in.
4.4 L351 Main Menu
The Main Menu (see Figure 4-2) appears after you log in. It provides access to all functions for the
L351: setup, diagnostics, and reports. The Logout option is available only when the L351 is in a 1020
standalone enclosure.