CANOGA PERKINS L351 10/100BASE Media Converter - Manual (Page 26)

EdgeAccess Universal Chassis System
4-2 L351 10/100BASE Media Converter
4.3 Management User Interface
The Management User Interface for the L351 provides screens for setup, monitoring, and diagnostics.
You can access the screens directly by connecting to the serial port of the BAM, the Model 1020, the
DMM in the chassis, or by establishing a Telnet session with the DMM. For details, see the Model
1500 Domain Management Module User Manual (for UCS 1000) or Model 1502 Domain
Management Module User Manual (for UCS 1002).
These sections discuss the screens for the L351, using a Telnet session for access.
4.3.1 General Screen Format
A typical screen, shown in Figure 4, includes standard descriptions and reference designations. Use
this and other screens to configure the system, set operational parameters, and verify the system
status. All screens use a common method for navigation.
Figure 4-1. General Screen Format
Not all screens and menus provide options that you can change. Some menu items reach screens that
only report status, such as revision numbers, module type, or alarms. On other screens, you can move
through and select options, and enter data.
Use these keys to navigate the screens:
• Space bar - When a menu item is highlighted, press <Space> to cycle through all options for that
item.
• Tab - To move the highlight to the next column to the right.
• Enter - To select the highlighted option for a menu item.
• Escape - To return to the previous screen.