Dynon Avionics EFIS-D10A Pilots Users Guide - Manual (Page 15)

3. PRODUCT OPERATION
After reading this section, you will be familiar with the basics of how to use your EFIS-D10A. For details regarding
specific procedures (e.g., adjusting display brightness, changing the altimeter setting, setting the clock, etc.) please refer
to the EFIS Operation section.
Front Panel Layout
All normal operation of the EFIS-D10A happens via the front panel. The
front panel contains buttons and a display.
 Buttons – There are six buttons on the front panel of the EFIS-
D10A. Throughout this guide, these buttons are referred to as one
through six, with button one being the leftmost and button six being
the rightmost. EFIS-D10A buttons are used to turn the instrument on
and off, cycle between screens, scroll through menus, and adjust
instrument parameters.
 Display – The display shows EFIS information, menus, and data
obtained from other connected products.
EFIS-D10A Pilot’s User Guide 3-1
User interaction takes place via the EFIS-
D10A main display and the six buttons
beneath. Note: buttons are not labeled on
actual product
1 2 3 4 5 6