Dynon Avionics EFIS-D10A Pilots Users Guide - Manual (Page 37)

5-4 EFIS-D10A Pilot’s User Guide
The airspeed bug can be adjusted on any EFIS page in the system and is synchronized across all EFIS-based
units.
When in the BUGS > IAS menu, rotate the AP74’s or HS34’s VALUE knob to quickly change the bug’s set
button to turn on
ltitude. If you have the altitude bug displayed, the marker moves up or
value.
ALTITUDE
In the BUGS menu, press ALT. Press the TOGGLE
or off the altitude bug display on the altitude tape.
In the ALT bug menu the value-setting box is displayed in the lower
part of the display. Press SEL► to select which digit to change and
DEC- and INC+ to change the selected digit. Press the SYNC button
to synchronize the altitude bug to your current a
down the altitude tape as you change its value.
The altitude bug can be adjusted on any EFIS page in the system and is synchronized across all EFIS-based
units.
When in the BUGS > ALT menu, rotate the AP74’s or HS34’s VALUE knob to quickly change the bug’s set
value. Alternately, the altitude bug can be adjusted at any time by using the HS34’s or AP74’s VALUE knob.
Exact behavior is defined in the SETUP > (HSI or AP) > VALUE KNOB menu.
If the BUGS > ALM button is toggled to ALT, then turning the altitude bug on enables the altitude alerter function
with the bug value as the target altitude. While climbing or descending toward the target altitude a level-off alert sounds