Dynon Avionics EFIS-D10A Pilots Users Guide - Manual (Page 31)

Available Pages
clock indicates whether the unit is displaying Local time (L), Zulu time (Z), or a timer (T). If a GPS is connected to your
Dynon network and is outputting time information, the Zulu time of all connected products is auto-set to that reported by
the GPS.
Autopilot Status Indicator
When a Dynon Autopilot is installed and configured, an AP Status Indicator is displayed at the
bottom left of the EFIS page. It provides information about whether the Autopilot is engaged and
what mode(s) it is engaged in. See Autopilot Operation on page 7-1.
HSI Page
Available in full format
Your EFIS-D10A can function as a Horizontal Situation Indicator (HSI) when
it is receiving data from Dynon’s HS34 (connected to a NAV radio), an
external GPS, or Garmin SL30 Nav radio. The HSI information is overlaid on
a directional gyro (DG) representation of the EFIS's stabilized magnetic
heading information. If no GPS or NAV radio source is present in the system,
the HSI page will still display the DG, but without any additional navigation
information.
For detailed information on using the HSI page, please see the HSI Operation
section on page 6-1.
EFIS-D10A Pilot’s User Guide 4-9