Dynon Avionics EFIS-D10A Pilots Users Guide - Manual (Page 24)

Available Pages
EFIS Main pages
Available in full-page format
The EFIS-D10A default screen rotation includes only 2/3 EFIS pages
combined with the various EMS and HSI pages described below. However,
you may also choose screen configurations that use 1/3 and full-screen
pages. The 2/3 and full-screen pages can display EFIS- and EMS-related
info items on the left and right side of the screen. You can enable any of the
non-default EFIS screens as described in the Changing the Screen Rotation
section on page 3-5. Some of the displayed items described below may not
be onscreen, depending on whether or not they have been enabled in the
CLUTTR menu.
Beginning with firmware revision 3.0, Dynon adopted a dramatically
different EFIS display format than it had previously used. If your EFIS
display does not resemble the layouts shown at right, first ensure that you
are using firmware version 3.0 or higher. Then, ensure that the setting at EFIS > SETUP > STYLE is set to MODERN. If
you prefer the previous display style, you can change this setting to CLASSIC. The classic display format is documented
in previous revisions of this manual, available on Dynon Avionics’ website at
docs.dynonavionics.com . No further
development will occur on the classic display format.
The following sub-sections describe the displayed items in detail.
4-2 EFIS-D10A Pilot’s User Guide