Dynon Avionics EFIS-D10A Pilots Users Guide User Manual
Page 88
Advertising
Appendix
EFIS-D10A Pilot’s User Guide
9-7
Alert Message
Description
End condition
OAT SENSOR NOT
DETECTED
This alert appears when the EFIS has an OAT
connected and then loses that connection for
some reason. Either the EDC-D10A has become
disconnected, or the OAT sensor itself has
become disconnected from the EDC-D10A.
Double-check your wiring between the EFIS-
D10A and the EDC-D10A as well as that of the
OAT sensor.
Advertising