Dynon Avionics EFIS-D10A Pilots Users Guide - Manual (Page 39)

EFIS Operation
To load checklists and data panels onto your EFIS-D10A, you must upload them as described in the Dynon Product
Support Program help file. Pushing the LIST button displays the 5 main categories as set up in the Dynon Support
Program. Press a button corresponding to the desired category to show the checklists and data panels beneath it. When
screen. See the Dynon Support Program for more detailed information on
downloaded from our website at downloads.dynonavionics.com
you display a checklist, it takes up the entire
entering checklists and data panels. It can be
.
p enu should only be
c d in the EFIS-D10A
evant
may change the system-wide
SETUP – Setting Preferences
Enter the EFIS > SETUP menu to make changes to
references. Many of the settings in this m
hanged by the installer, and are describe
Installation Guide. The preferences and settings that are rel
CHANGE DISPLAYED UNITS
In the UNITS submenu, you
to the pilot and in-flight operation are explained below.
displayed units for the following units. See the
following table for a list of available units for
each displayed parameter.
Parameter Available units
Airspeed (IAS) Knots, mile eters/hour s/hour, kilom
Altitude (ALT) Feet, meters
In a DSAB netw
are shared between all conne ork, unit preferences
cted
5-6 EFIS-D10A Pilot’s User Guide
instruments.
SET THE CLOCK
Entering the EFIS > SETUP > CLOCK menu displays the
local and Zulu times in the value-setting box. Because local
Temperature (TEMP) Celsius, Fahrenheit
Barometric Pressure (BARO) inHg, mbar
Distance (DIST) Nautical miles, statutory miles, kilometers