Dynon Avionics EFIS-D10A Pilots Users Guide - Manual (Page 47)

EFIS Operation
without auto-dim. The system records the new set level as the desired brightness, and auto-adjusts around the
new set point.
TIMER – Setting and using a timer
Enter the EFIS > TIMER menu. In the value setting box, the
DOWN or UP label is displayed, depending on which timer t
is currently selected. The currently running timer is displa
the Times/Aux Page, as described on page
ype
yed on
4-10. Use the
following points as you work with the timer.
 The UP/DN button toggles the menu and timer between an up timer and a down timer. When switching to an up
timer, the timer set value resets, allowing the up timer to count up from 0:00:00.
 To reset the timer, press the UP/DN button twice.
 To start the timer, press START. Once started, the button’s label changes to STOP. To stop the timer, press
STOP.
 To set the down timer, press HOUR, MIN, and SEC to adjust the timer to the desired value.
 You may not have an up timer and a down timer running at the same time.
Multiple Dynon products connected via a DSAB network share one timer. Starting, stopping, or configuring the
timer on one instrument causes all other instruments to reflect the change.
5-14 EFIS-D10A Pilot’s User Guide