Failure modes – Dynon Avionics EFIS-D10A Pilots Users Guide User Manual

Page 64

Advertising
background image

Autopilot Operation

7-4

EFIS-D10A Pilot’s User Guide

AP Status Indicator Modes

AP State

Roll Display

Pitch Display

Status: Altitude Hold

ug as target altitude

Mode; AP uses Altitude B

N/A

ALT

Warning: Servo slipping

Mode

ellow

background

Mode

ellow

background

display with y

display with y

AP Status Indicator Errors

AP State

Roll Display

Pitch Display

Warning: Servo has been c

sted (See: SETUP > AP >

TST (red text)

TST (red text)

alibrated but not te

SERVO TEST)

Warning: Airspeed outsid

eed. See: SETUP > AP >

PITCH SERVO.

e min or max airsp

SPD (red text)

SPD (red text)

Warning: Servo e

d. Check DSAB

ERR (red text)

ERR (red text)

rror condition detected, or servo not foun
configuration, wiring, and servo power.

A

he above error states cannot be engaged.

PS data. If an error is

ny axis that is in any of t

FAILURE MODES

The EFIS continuously monitors the overall operation of the AP as well as the state of incoming G
detected, the subsystem where the error has occurred is restricted and reported. Some examples:

 If an error in

the Pitch servo is detected, the AP reports an error in the Pitch servo, but continues operation of the

Roll servo.

Advertising