Dynon Avionics FlightDEK-D180 Pilots Users Guide User Manual
Page 106
Advertising
Appendix
11-10
FlightDEK-D180 Pilot’s User Guide
Alert Message
Description
End condition
OAT SENSOR NOT
DETECTED
This alert appears when the EFIS has an OAT
connected and then loses that connection for
some reason. Either the EDC-D10A has become
disconnected, or the OAT sensor itself has
become disconnected from the EDC-D10A.
Double-check your wiring between the
FlightDEK-D180 and the EDC-D10A as well as
that of the OAT sensor.
Advertising