Dynon Avionics FlightDEK-D180 Pilots Users Guide - Manual (Page 43)

EFIS Operation
categories: CHKLIST, RADIO, POH, EMGNCY and MISC. Each checklist/data panel can contain up to 14 lines of text
and 40 characters per line.
To load checklists and data panels onto your FlightDEK-D180, you must upload them as described in the Dynon Produc
Support Program help file. Pushing the LIST button displays the 5 main categories as set up in the Dynon Support
Program. Press a button corresponding to the desired category to show the checklists and data panels beneath it. When
you display a checklist, the right 2/3 of the screen displays the check t
list while the left side displays a 1/3 format EFIS
ore detailed information on entering checklists and data panels. It can be
dynonavionics.com
page. See the Dynon Support Program for m
downloaded from our website at
downloads. .
in EK-D180 Installation Gu
th ed below.
stem-wide
ing units. See the
SETUP – Setting Preferences
Enter the EFIS > SETUP menu to make changes to preferences.
Many of the settings in this menu should only be changed by the
staller, and are described in the FlightD
e pilot and in-flight operation are explain ide. The preferences and settings that are relevant to
CHANGE DISPLAYED UNITS
In the UNITS submenu, you may change the sy
displayed units for the follow
Parameter A s vailable unit
Airspeed (IAS)
following table for a list of available units for
each displayed parameter.
Knots, s/hour miles/hour, kilometer
Altitude (ALT) Feet, meters
In a DSAB network, unit preferences
are shared between all connected
instruments.
Te ) mperature (TEMP Celsius, Fahrenheit
Barometric Pressure (BARO) inHg, mbar
Distance (DIST) Nautical miles, statutory miles, kilometers
5-6 FlightDEK-D180 Pilot’s User Guide