Dynon Avionics FlightDEK-D180 Pilots Users Guide - Manual (Page 41)

EFIS Operation
5-4 FlightDEK-D180 Pilot’s User Guide
The airspeed bug can be adjusted on any EFIS page in the system and is synchronized across all EFIS-based
units.
When in the BUGS > IAS menu, rotate the AP74’s or HS34’s VALUE knob to quickly change the bug’s set
to
e. If you have the altitude bug displayed, the marker moves up or down the altitude tape as you change its
value.
ALTITUDE
In the BUGS menu, press ALT. Press the TOGGLE button
turn on or off the altitude bug display on the altitude tape.
In the ALT bug menu the value-setting box is displayed in the
lower part of the display. Press SEL► to select which digit to
change and DEC- and INC+ to change the selected digit. Press the SYNC button to synchronize the altitude bug to your
current altitud
value.
The altitude bug can be adjusted on any EFIS page in the system and is synchronized across all EFIS-based
units.
When in the BUGS > ALT menu, rotate the AP74’s or HS34’s VALUE knob to quickly change the bug’s set
value. Alternately, the altitude bug can be adjusted at any time by using the HS34’s or AP74’s VALUE knob.
Exact behavior is defined in the SETUP > (HSI or AP) > VALUE KNOB menu.
If the BUGS > ALM button is toggled to ALT, then turning the altitude bug on enables the altitude alerter function
with the bug value as the target altitude. While climbing or descending toward the target altitude a level-off alert sounds