Dynon Avionics FlightDEK-D180 Pilots Users Guide - Manual (Page 16)

3. PRODUCT OPERATION
After reading this section, you will be familiar with the basics of how to use your FlightDEK-D180. For details regarding
specific procedures (e.g., adjusting display brightness, using the fuel computer, setting the clock, etc.) please refer to the
EFIS Operation and EMS Operation sections.
Front Panel Layout
All normal operation of the FlightDEK-D180 happens via the
front panel. The front panel contains buttons and a display.
 Buttons – There are six buttons on the front panel of the
FlightDEK-D180. Throughout this guide, these buttons are
referred to as one through six, with button one being the
leftmost and button six being the rightmost. FlightDEK-
D180 buttons are used to turn the instrument on and off,
cycle between screens, scroll through menus, and adjust
instrument parameters.
 Display – The display shows EFIS information and engine
parameters, menus, and data obtained from other connected
products.
1 2 3 4 5 6
User interaction takes place via the FlightDEK-D180
main display and the six buttons beneath. Note: buttons
are not labeled on actual product
FlightDEK-D180 Pilot’s User Guide 3-1