Connections, Caution – Yamaha RX-497 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS
C A U T IO N
•
Do noi couiiect tins unit or other components to the main power until all connections between components are complete.
■
Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could damage this unit and'
or the speakers.
■ All connections must be correct: L (left) to L, R (right) to R. to “+” and to
If the coiinections are faulty, no sound will be
heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. Also,
refer to the owner’s manual for each of your components.
■
Use the RCA type pm plug cables for audio and video components except speakers.
• The PHONO jacks are designed to comiect a turntable w'lth an MM or high-output MC cartridge. If you have a turntable with a low-
output MC cartridge, use an in-line boosting transfonner or an MC-head amplifier when connecting your turntable to the PHONO
jacks.
> Connect your turntable to the GND terminal to reduce noise in the signal. However, you may hear less noise wathout the connection to
the GND terminal for some record players.
Digital TV,
Cable TV
DVD player
VCR, etc.
Speakers A
■ I...... .. .
10