Recording a source, Notes, Note – Yamaha RX-497 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PLAYING AND RECORDING
Recording a source
Notes
The VOLUME. BASS, TREBLE, BALANCE and
LOUDNESS controls and the PURE DIRECT buttons have no
effect on the source being recorded.
Check the copwight laws in your coiintiy' to record from
records. CDs, radio, etc. Recording copyright-protected
material may infringe on copyright laws.
1
Play the selected source to record from.
Rotate VOLUME on the front panel (or press
VOLUME +/- on the remote control) to adjust
the sound output level of the selected source
to record from.
Remote control
Begin recording on the MD recorder, the tape
deck or the VCR connected to this unit.
If the 3-head tape deck is used for recording, you can monitor the
sound of recording by pressing MD/ TAPE MONITOR on the
front panel.
2
Rotate the INPUT selector on the front panel
(or press one of the input seiector buttons on
the remote control) to select the source you
want to record from.
Front panel
Remote control
Note
You cannot select any input source while the MD.tTAPE MON
indicator in the front panel display lights on.
17