Automatic preset tuning, Notes – Yamaha RX-497 User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

FM/AM TUNING

Automatic preset tuning

You can use the automatic preset tuning method to
automatically store FM stations. This function enables this
unit to automatically tune into FM stations with strong
signals and store up to 40 (8 stations in each of the 5

groups, A1 to E8) of those received stations in order. You
can then easily recall any preset stations by selecting the

preset station numbers w here they are stored.

Notes

• Any station data stored under a preset station number is cleared

when you store a new station under that preset station number.

• If the number of received stations does not reach 40 (E8),

automatic preset tuning automatically slops once searching all
available stations are tuned into and stored.

• Only FM stations with sufficient signal strength are stored

automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, try using the manual
preset tuning method.

HE

I

1

Rotate the INPUT selector (or press TUNER
on the remote control) to select TUNER.

2

Press FM/AM on the front panel to select FM

as the reception band.

FM appears in the front panel display.

Press and hold MEMORY on the front panel

for more than 3 seconds.

The preset station group and the MEMORY and

AUTO indicators flash in the front panel display.

Press TUNING/CH <1 /1> once to begin

automatic preset tuning.

Press I> to tune into higher frec[uencies.
Press ■<] to tune into lower freciuencies.
When automatic preset tuning is complete, the

frequency of the last preset station is shown in the
front panel display.

-.3 TUWirSG/CH I-.:-

Notes

If TUNING/CH <1 /1> IS not pressed within approximately .s

seconds while the MEMORY and AUTO indicators are
flashing, automatic preset timing automatically begins from the

currently displayed frequency and proceeds toward higher

frequeiicies.

• Received stations are sequentially programmed to 8 stations in

each preset station group. If 8 stations are all programmed in a
preset station group, another 8 stations are sequentially
programmed in the next preset station group.

Front panel

Remote control

22

Advertising