Note – Yamaha RX-497 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FM/AM TUNING
■ Customized automatic preset tuning
You can specify a preset station group and a preset station
number from which this unit stores the FM stations
received by automatic preset tuning.
1
Press and hold MEMORY on the front panel
for more than 3 seconds.
Press TUNING/CH <1 / > on the front panel to
begin automatic preset tuning.
Press l> to tune into higher frequencies.
Press <3 to tune into lower frequencies.
When automatic preset tuning is complete, the
frequency of the last preset station is shown m the
front panel display.
'S.l TUMING/CH i:-'
Press A/B/C/D/E and then press one of the
preset station/channel number buttons on
the front panel to select the preset station
group and the preset station number where
the first received station will be stored.
For example, if you select C5, the first received
station
IS
automatically programmed to C5 and the
next received stations are sequentially programmed
to C6. C7. etc.
Note
Automatic preset tuning stops when the received stations have all
been stored up to E8.
♦
23