Yamaha RX-497 - Manual (Page 22)

PLA YING AND RECORDING
Using the sleep tinier
Use this feature to automatically set this unit to the
standby mode after a certain amount of time. The sleep
timer is useful when you are going to sleep while this unit
is playing or recording a source. The sleep timer also
automatically turns off any external components
connected to the AC OUTLETS.
!
Bacffebslti
■ iliil
a i I I ■
i, B J ^
Press SLEEP repeatedly so that SLEEP OFF
appears in the front panel display.
..Si FFP ilFi
After a few seeonds, SLEEP OFF disappears from the
front panel display, and the SLEEP indicator turns
off
The sleep timer setting can also be canceled by pressing
STANDBY on the remote control (or MAIN ZONE ON/OFF or
MASTER ON'OFF on the front panel) to set this unit to the
standby mode.
Notes
• The sleep timer can only be set with the remote control.
• The sleep timer automatically turns off Zone 2. However, the
power of Zone 2 components are not turned off
1
Press one of the input selector buttons on
the remote control to select an Input source.
2
Start playback on the selected input source.
3
Press SLEEP repeatedly to set the amount of
time before this unit is set to the standby
mode.
Each time you press SLEEP, the front panel display
changes as shown below.
The SLEEP indicator flashes while switching the
amount of time for the sleep timer.
SLEEP 1 2 0 Fiin
18