Yamaha RX-497 User Manual

Page 47

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TROUBLESHOOTING

The sound is
degraded when

listening with the
headphones

connected to the CD
player or the tape
deck connected to

this unit.

The power of This imil is fumed otf, or this

unit is set to the standby mode.

Tm’n

Oil

tile power of this unit.

14

The sound levei is

low.

The LOUDNESS conti"ol is flinctioning.

Set the LOUDNESS control to the ELAT position.

16

Using the BASS,

TREBLE, BALANCE
and LOUDNESS
controls does not

affect the tonal
quality.

The PURE DIRECT button is turned on.

The PURE DIRECT button must be turned off to use
those controls.

16

Tuner

Problem

Cause

Remedy

See

page

FM stereo
reception is

The particular characteristics of the EM
stereo broadcasts being received may

Clieck the antenna connections.
Try using a high-quality directional FM antenna..

12

noisy.

cause this problem when the Transmitter is
too far away or the antenna mput is poor.

Tiy using the manual tuning method.

21

FM

There is
distortion, and
clear reception
cannot be
obtained even
with a good FM
antenna.

There is multipath interference.

Adjust the antenna position to eliminate the multipath

interference.

The desired
station cannot
be tuned in
with the
automatic
tuning method.

The signal is too weak.

Try using a. high-quality directional FM antenna..

12

Try using the manual tuning method.

21

Previously
preset stations
can no longer
be tuned in.

This unit has been disconnected for a long

period.

Preset the stations again.

22

The desired
station cannot

The signal is weak or the antenna
connections are loose.

Tighten the AM loop antenna connections and orient

it for the best reception.

be tuned in
with the
automatic
tuning method.

Try using the manual tuning method.

21

AM

There are
continuous
crackling and
hissing noises.

Tile noises may result horn lightning,
fluorescent lamps, motors, thermostats or
other electrical equipment.

Tiy using an outdoor antenna and a ground wire.
This will help somewhat, but it is ditficult to
eliminate all noise.

There are
buzzing and
whining noises.

A TV set is being used nearby.

Move this unit a.way from the TV set.

43

Advertising