Connections – Yamaha CINEMASTATION NX-C300 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections
O Connect the speaker cable with the white line to
the + connector on the front/center/surround
speaker and with the black band to the
- connector.
release the lever.
O Connect the speaker cable with the white line to
the + connector of each terminal on the
subwoofer and with the black band to the
- connector.
Connect the subwoofer to the DVD receiver using
the system control cable from the subwoofer to
the TO NX-SW300 terminal at the rear of the
DVD receiver.
Notes:
- Ensure that the speaker cables are correctly
connected. Improper connections may damage the
system due to a short-circuit.
- When connecting the speakers, fix the speaker
cables in place so that cables do not loosen. If your
foot or hand accidentally gets caught on a loose
speaker cable, the speaker may fall.
- To prevent unwanted noise, do not place the
subwoofer too close to the DVD receiver,AC power
adaptor,TV or other sources of radiation.
the ¡ever.
12