Playing discs, Auto eco power standby mode, Basic playback controls – Yamaha CINEMASTATION NX-C300 User Manual

Page 26: Selecting various repeat/ shuffle functions, Repeat play mode, Disc operations

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Disc Operations

IMPORTANT!

- If the inhibit icon (Q ot X) appears on the

TV screen when a button is pressed, the
function for that button is not available on
the current disc or at the current time.

- DVD discs and players are designed with

regional restrictions. Before playing a disc,
make sure the disc is for the same zone as

your receiver.

- Do not push on the disc tray or put any

objects other than discs on the disc tray.

Doing so may cause the disc player to
malfunction.

Playing discs

O

Press DVD/CD until “Si/S.'CI]” appears on the

display panel.

0Turn on the TV power and set to the correct Video

In channel (see “Setting the TV” on page 19),

“>You should see the background screen on the
TV.

o Press A once to open the disc tray and load a disc,

then press the same button again to close the disc
tray.

Make sure the disc label is facing up.

O Playback will start automatically.

•♦To playback a specific disc directly, press DISC

SKIP repeatedly on the remote control or press

DISC (1,2,3,4,S) on the front panel.

*♦ Press PLAYXCHANGE on the front panel to

open the disc tray and reload or unload discs
without interrupting current disc playback.

•♦ Playback will stop after all discs have been

played.

*♦ If a disc menu shows on the TV, see “Using the

disc menu” on page 24.

•♦ If the disc is locked by parental control, you must

enter your six-digit password (see “Restricting

playback with Parental Control” on page 33).

Auto Eco Power standby mode

This is a power-saving feature.The receiver will
automatically switch to Eco Power standby mode if

you do not press any buttons for 30 minutes after

a disc has stopped playing.

Basic playback controls

Pausing playback

During playback, press II (►II).

-♦ To resume normal playback, press ► (or ►ll).

Selecting another track/chapter

Press / ►►! or use the numeric keypad

(0-9) to enter a track/chapter number.
*♦ During repeat playback of a tracic/chapter,

pressing

!-♦< / ►►I

will replay the same track/

chapter.

Searching backward/forward

Press and hold I-« / ►►!, To resume normal

playback, press ► (or

►ll),

*♦ While searching, pressing / ►►! again will

increase the search speed.

Stopping playback

Press ■.

Selecting various repeat/

shuffle functions

Repeat play mode

Repeat chapter/title/disc (DVD-V)

Each time you press REPEAT, the front display

charges as follows;

I

---- ► O CHAPTER

L REPEAT OFF O ALL DISC

o TITLE

O Disc

CEiAPTER*; repeats the current chapter

O TITLE: repeats the current title

DISC*: repeats the entire disc

ALL DISC: repeats all discs loaded in the tray

REPEAT OFF: exits repeat mode

* This feature may not be available with some discs.

TIPS:.............The operating features described here might not be possible for certain discs. Always refer to the

instructions supplied with the disc,............................................................................................................

22

Advertising