Setting speaker channels, Getting started – Yamaha CINEMASTATION NX-C300 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Started
Setting speaker channels
You can adjust the delay times (for center and
surround speakers only) and volume level for
individual speakers. These adjustments let you
optimize the sound of your system to best suit
your surroundings and setup,
IMPORTANT!
Press the SURR button on the remote
control to select the multi-channel surround
mode before adjusting the speaker settings,
O
Press ■ to stop playback, then press
SET UP.
0 Press ► repeatedly to select [AUDIO SETUP
PAGE],
©Press AT to highlight [SPEAKER SETUP],then
press ►.
[SPEAKERSVOLUME] -Volume level setting for
individual speakers (-6dB ~ +6dB).
SPEAKERS VOLUME SETUP
FRONT RIGHT
CENTER
SUBWOOFER
SURROUND L
SURROUND R
OrIB
!IJB
OdB
n.lH
OdB
[SPEAKERS DELAY] - Delay time settings is in
relation to the listening position/distance for center
and surround speakers (QMS ~ 1SMS).
SF'EAKERS DELAY SETUP
AUDIO SETUP PAGE
NIGHT MODE
‘SPEAKER SETUP PAOL
ForAKERRVOI J.Vr
SPrAKFRS DPI AV
O Press
AT
to select a language and press ENTER
(OK) to confirm.
0 Press
AT
to highlight one of the options below,
then press ►,
SURROUND
L
L
SURROUND R L
; 0 MS
0 MS
0
Press ► to adjust the setting that best suit your
surround sound needs.
O Press ENTER (OK) to confirm.
Notes;
-
Use a longer delay time settings when the surround
speakers are closer to the listener than the front
speakers.
- A test tone will be automatically generated to help
you judge the sound level of each speaker.
TIPS
To return to the previous menu, press -
To dear the menu, press SET UP.
21