Inserting batteries into the remote control, Using the remote control, Getting started – Yamaha CINEMASTATION NX-C300 User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Getting Started

Inserting batteries into the

remote control

OOpen the battery compartment,

0 Insert two batteries type R06 or AA, following the

indications (+/“) inside the compartment.

0 Close the cover.

To replace the batteries

If the batteries grow old, the effective operation

distance of the remote control decreases

considerably. If this happens, replace the batteries
with two new ones as soon as possible.

Notes:
- Do not use an old battery together with new one.
- Do not use different types of batteries (for example,

alkaline and manganese) together. Each type of
battery has its own characteristics even if they are
similar in shape.

- If the batteries run out, immediately remove them

from the remote control to prevent an explosion or
add leak.

- Dispose of the batteries according to the regional

regulations.

- If a battery starts leaking, dispose of it immediately.

Be careful not to let leaking battery acid come into
contact with your skin or clothing. Before inserting
new batteries, wipe the compartment clean.

- Replace the batteries within two minutes to preserve

the memory in the remote control

Using the remote control

Use the Remote Control within 6 m(20 feet) of the

DVD receiver and point it toward the Remote

control sensor.

0

Press Input selection buttons on the remote

control to select the mode you wish to control

(for example TV, DVD/CD).

The selected source mode appears in the display

panel.

0

Then select the desired function (for example ►/

1-*^ / ►►!).

The remote control can also operate a television,
cable TV or satellite connected to the DVD

receiver. However, it is first necessary to enter the

remote control code for the equipment in the
remote control’s memory (see “Setting remote

control codes” on page 38).

Notes:
- Be careful not to spill liquid on the remote control.
- Be careful not to drop the remote control.
- Do not leave the remote control in the following

places:
- hot or humid places, such as near a

heater or in a bathroom

- extremely cold places
- dusty places

18

Advertising