Yamaha CINEMASTATION NX-C300 - Manual (Page 18)

Connections
Connecting a progressive scan
TV
Placing the speakers and
subwoofer
DVD Receiver
IMPORTANT!
- Pfogressive scan video quality is oniy
available when usingY P b P r in conjunction
with a progressive scan TV,
Using component video output
(Y PB PR)
O
Use the component video cables
(red/blue/green - not supplied) to connect the
DVD receiver’s
Y P b P r jacks to the corresponding
component video input jacks (orY Pb/Cb Pr/Cr/
YUV jacks) on the TV
©Activate the progressive scan function
{see "Progressive function-(on/off)” on page 32).
For the best possible surround sound, all of the
speakers (except the subwoofer) should be placed
at the same distance from the listening position.
O
Place the front left and right speakers at equal
distances from the TV.
e Place the center speaker above the TV so that the
center channel’s sound is localized.
0
Place the surround speakers at normal listening ear
level facing each other or hang on the wall.
Place the subwoofer on the floor near the TV.
Notes:
- To avoid magnetic interference, do not position the
front speakers too close to your TV.
- Allow adequate ventilation around the DVD receiver
and subwoofer.
14