Setting language preferences, On-screen display (osd) language, Audio, subtitle and disc menu languages – Yamaha CINEMASTATION NX-C300 User Manual
Page 24: Getting started
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Started
Setting language preferences
You can select your preferred language settings so
that this receiver will automatically switch to your
preferred language for you whenever you load a
disc. If the language selected is not available on the
disc, the disc’s default setting language will be used
instead.The OSD (on-screen display) language for
the system menu will remain as you set it,
regardless of various disc languages.
On-screen display (OSD) language
O In DVD/CD mode, press SET UP.
0 Press ► to select [GENERAL SETUP PAGE].
©Press AT to highlight [OSD LANGUAGE],then
press ►.
.frri,
GENERAL SETUP F’AGE
DVD
AUDIO
Disc: LOCK
PROGR.Aid
iLsil!
Audio, Subtitle and Disc menu
languages
O Press ■ twice to stop playback (if any), then press
SET UP
© Press ► repeatedly to select [PREFERENCE
PAGE],
© Press
AT
to highlight one of the options below at
a time, then press ►.
- [AUDIO] (disc’s soundtrack)
- [SUBTITLE] (disc’s subtitles)
- [DISC MENU] (disc’s menu)
PREFERENCE PAGE
iCREc.r^J SAVER
JiVXiFt! VCD CODE
© Press
AT
to select a language and press ENTER
(OK) to confirm.
O Press
AT
to select a language and press ENTER
(OK) to confirm.
If the language you want is not in the list,
then select [OTHERS],
Use the numeric keypad (0-9) on the remote
control to enter the 4-digit language code ‘XXXX’
(see “Language Codes” at the end of this manual)
and press ENTER (OK) to confirm,
© Repeat steps © 0 for other
settings.
r/PS; To return to the previous menu, press
To dear the menu, press SET UP.
20