Tuner operations, Tuning radio stations, Presetting radio stations – Yamaha CINEMASTATION NX-C300 User Manual

Page 39: Using plug and play, Automatic presetting, Manuai presetting, Manual presetting

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Tuner Operations

IMPORTANT!
Make sure the FM and AM
antennas are connected to this receiver.

Tuning radio stations

©Press TUNER

to select •‘Ti !I> ICD

© Press AT briefly on the remote control.

"5ERRLH" appears,

*♦ The next radio station is tuned automatically.

© Repeat step © (if necessary) until you find the

desired radio station.

©To tune weak stations, press -< ► briefly and

repeatedly until the optimal reception is found.

• If the FM station reception is weak, you can switch

the FM mode from stereo to mono, Press SURR
to toggle through:

DOLBY PL II FM STEREO

-♦ DOLBY PL II FM MONO

-♦ STEREO FM MONO

-♦ STEREO FM STEREO

Presetting radio stations

You can store up to 20 FM and 10 AM preset radio

stations in this receiver’s memory.

Notes:

- The receiver will exit presetting mode if no button is

pressed within 20 seconds.

- If no valid frequency is detected during Plug and Play,

THtTiL' RffTSriJfjR” appears.

Using Plug and Play

Plug and Play allows you to store all available radio
stations automatically.

©Press TUNER.

-♦ “RLTD PRESET” and ‘‘PRESS PLRS'” appear

one after the other if installation was not

completed after you purchased the DVD receiver.

© Press ► on the front panel to start installation.

-♦‘‘RE'TO PRESET” appears,

•♦Once complete,the last tuned radio station will

play.

•♦All available FM stations are stored, followed by

all available AM stations.

To stop installation, press ■.

Automatic presetting

You can start automatic presetting by pressing a

selected preset number.

Nun

PKOG

vPRESETy\

TUNER

keypad (0-9)

©Press TUNER I

R''F('i” or

© Press

or use the numeric keypad (0-9)

to select a preset number to begin.

© Press and hold PROG until ‘‘Ru

pi irn nnprrT”

Mu f U r'TTLDC I

appears.

•♦ If a radio station is stored in one of the earlier

presets, the same radio station will not store under

another preset number.

•♦ If no preset number is selected, automatic preset

will begin from preset (1) and all former presets

will be overridden.

Manuai presetting

You can choose to store only your favourite radio
stations.

©Tune the desired radio station (see‘Tuning radio

stations”).

© Press PROG,

© Press

to select a preset number.

O Press PROG again to store.

35

Advertising