Troubleshooting – Yamaha CINEMASTATION NX-C300 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Troubleshooting
Problem
Solution
The remote control does not function properly.
Select the source (DVD/CD or TUNER, for example)
before pressing the function button / ►►!).
Reduce the distance between the remote control and the
receiver.
Replace the batteries with new ones.
Point the remote control directly toward the remote
control sensor.
Check that the batteries are loaded correctly.
The remote control does not work for operating
other equipment*
Set the correct remote control code. Depending on the
model and year of the product, the DVD receiver’s remote
control may not be able to operate it partly or wholly. In
this case, use the remote control supplied with each
procduct.
Unable to play DivX movies.
Check that the DivX file was encoded in ‘Home Theater’
mode with a DivX 5.x encoder.
The DVD receiver does not work.
Disconnect the power cord from the power outlet for a
few minutes. Reconnect the power cord and try to
operate again as usual.
NOTE: When sending the product for servicing, both the DVD receiver and the subwoofer are required.
43