Tunet* operations, Selecting a preset radio station, Deleting a preset radio station – Yamaha CINEMASTATION NX-C300 User Manual
Page 40: Setting frequency step (australia model only)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tunet* Operations
Selecting a preset radio
station
• Press
or use the numeric keypad (0-9)
to select a preset number.
The waveband, preset number, then radio
frequency will appear.
Deleting a preset radio station
• Press and hold ■ on the front panel until “Rfi.;."
UELTI
j
”
SELT]]” = preset number)
appears.
•♦The current preset radio station is deleted.
Setting frequency step
(Australia model only)
The inter-station frequency spacing differs
depending on the areas. Set the frequency step
according to the frequency spacing in your area.
Choices: AM9kHz/FMS0kHz
AMIOkHZ/FMIOOkHz
Default setting:AM9/FM50
To change the AM band to 10kHz and the
FM band to 100kHz
O Unplug the AC power cord from the DVD receiver.
o While pressing and holding INPUT and on the
front panel, plug the AC power cord to the DVD
36