Yamaha CINEMASTATION NX-C300 - Manual (Page 8)

Introduction
Thank you for purchasing this unitThis Owner's
Manual explains the basic operation of this unit.
Region Codes
The unit is designed to support the Region
Management System, Check the regional code
number on the disc package. If the number does
not match the unit’s region number (see table
below, or see back of unit), the unit may be unable
to play the disc.
Model
Region
number of
the unit
Playable
discs
U. S.A.and
Canada models
H ffl m
Australia
model
a H H
Notes About Discs
- This receiver is designed for use with
the following discs: Super Audio CD (SA-CD),
DVD-'^ideo.'V^ideo CD, Super Video CD,Audio
CD, CD-R, CD-RW, DVD-Audio, DVD+RW,
DVD+R, DVD-R and DVD-RW.
This receiver can play:
- MP3 and picture (Kodak,JPEG) files recorded on
CD-R(W),
- jPEG/ISO 9660 format
- Maximum 30 character display
- DivX® disc on CD-R[W]/DVD+R[W]/
DVD-R[W](3.11,4.x and 5.x)
- CD-R and CD-RW cannot be played unless
finalized.
- Some discs cannot be played depending on the
recording conditions, such as the PC
environment and application software.
The characteristics and application software.
The characteristics and condition of some discs;
materials, scratches, curvature, etc, may result in
playback failure.
- Be sure to use only CD-R and CD-RW discs
made by reliable manufacturers.
- Do not use any non-standard shaped discs
(heart-shaped, etc.),
- Do not use discs with tape, seals, or paste on
their surface. Doing so may damage this receiver.
- Do not use discs affixed with labels printed by a
commercially available label printer.
Cleaning Discs
- When a disc becomes dirty, clean it with a
cleaning cloth, Wipe the disc from the center
out. Do not wipe in a circlar motion,
- Do not use solvents such as benzine, thinner,
commercially available cleaners, or antistatic
spray intended for analog records.
Avoid high temperatures, moisture, water
and dust
- Do not expose the system, batteries or discs to
humidity, rain, sand or excessive heat (caused by
heating equipment or direct sunlight). Always
keep the disc tray closed to avoid getting dust
on the lens.
Avoid condensation problem
- The lens may cloud over when the receiver is
suddenly moved from cold to warm
surroundings, making it impossible to play a disc.
Leave the receiver in the warm environment
until the moisture evaporates.
Disc care
- Write only on the printed side of a CD-R/
CD-RW and only with a soft felt-tipped pen.
- Handle the disc by its edge; do not touch the
surface.
Cabinet care
- Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia, or abrasives,
Choosing a suitable location
- Place the receiver on a flat, hard, and stable
surface.