Yamaha DTR2 - Manual (Page 7)

Display window
0 Remote control transmit indicator
Lights when the remote control transmitter is operated.
0 TOC (Table of Contents) indicator
Lights when a tape containing a TOC is played.
0 Tune number display
Indicates the tune number.
0 COUNTER indicator
Lights when the display is in counter mode.
0 ABS (Absolute time) indicator
Lights when the display shows ABS time (elapsed
playing time from the beginning of the tape).
© Counter/ABS time/Tune playing time/Programmed
tune number display
Displays the tape counter reading, ABS time, tune
playing time (elapsed playing time from the beginning
of the current tune) or programmed tune number.
© PROG indicator
Lights when the display shows the elapsed playing time
from the beginning of the current tune.
0
Sampling frequency indicators
Light according to the sampling frequency of the audio
signal.
© DEW indicator
Appears when condensation occurs in this unit (drum,
head, etc.).
0 COPY PROHIBIT indicator
Appears when a recording cannot be performed with a
digital signal. In this case, record the source using the
ANALOG jacks.
0 WARNING indicator
If the head becomes excessively dirty, a signal read
error occurs during playback, and the sound cannot be
heard. At this time, the "WARNING" indicator appears.
If this occurs, use a commercially available digital audio
cleaning tape or have your Yamaha dealer clean the
head.
® ST-ID/SKIP-ID/END-ID indicators
Light when the start ID, skip ID or end ID signal is
detected, or flashes when it is written or erased.
0 APMS (Automatic Programmable Music Selector)
indicator
Appears when programming or during program
playback.
0 APSS (Auto Program Search System) indicator
Appears when the beginning of a tune is searched for.
0
Peak levei meter
Displays the recording level or playback level.
0
EMPHASIS indicator
Appears when tapes recorded with emphasis are
played, or when recording from a digital source on
which emphasis is applied. The emphasis function
reduces the noise of the high frequency fevel by
boosting the high frequency level during recording
(Pre-emphasis function) and lowering it during
playback (De-emphasis function). This unit
incorporates only the de-emphasis circuit. You can
play or record emphasized signals but cannot newly
apply emphasis to signals.
© Play indicator (►)
Lights when the PLAY button is pressed.
0
Recording indicator (•)
Lights when the REG button is pressed.
0
Pause indicator (ii)
Lights when the PAUSE button is pressed, or in record
stand-by mode.
0 Repeat indicator (c;)
Lights during repeat playback.