Starting up/shutting down, Starting up, 7 open the display – Panasonic CF-M32 Series User Manual
Page 15: 2 turn your computer on, Starting up/shutkr^ down_ 15, Xii 2 ie
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
starting Up/Shutting Down
Starting Up
7 open the display
Slide the latch as shown and lift open the dis
play.
Xii2IE>
The computer will not power on when the
LCD Panel is closed.
2
Turn your computer on
Slide the power switch toward the rear of the
computer and hold it for approximately one
second until the power indicator (^) turns
on before releasing it.
If the power switch is held for more than four seconds at the ON position,
the power goes OFF. Do not slide the power switch and hold it for more
than four seconds.
After confirming that the power indicator has turned on, do not touch the
power switch until Windows has completely started up. Also do not per
form any keyboard or trackball operations.
Once the computer is powered off, you must wait at least five seconds
before powering it on again.
When the CPU temperature rises, the computer does not power on to pre
vent the CPU from overheating. Should this happen, allow the computer to
cool down then switch the power on again.
If the computer still does not turn on, please contact Panasonic Technical
Support.
15