Panasonic CF-M32 Series - Manual (Page 66)

Reinstalling Software
6
Setting PC Card
1. Double-click [PC Card (PCMCIA)) in [Control Panel].
2. The [Welcome to the PC Card (PCMCIA) Wizard] window will be displayed.
Select [No], then click [Next].
3. Select [No], then click [Next] and [Finish].
4. The following message will be displayed: [Would you like to shut down your
computer now ?]. Click [Yes].
The computer will power off automatically.
7
Attach the CD-ROM drive
A CD-ROM drive is required in order to perform the installation procedure de­
scribed below. After connecting the CD-ROM drive, turn on the computer and
wait for it to be recognized by Windows 95.
See the manual included with the CD-ROM drive for information on how to attach
it.
8
Change the system properties
1. Double-click [System] in [Control Panel].
2. Click [Device Manager] under [System Properties].
3. Click the mark El to the left of [CDROM], then select CD-ROM drive and
click [Properties].
4. Click [Settings]. Set [Start drive letter] and [End drive letter] to [L;] in [Re­
served drive letters], then click [OK].
5. Click the mark S to the left of [Disk drivers], then select [GENERIC IDE
DISK TYPE<7] and click [Properties],
6. Click [Settings], then add the check mark for [DMA] in [Option]. Click
[OK].
7. Click [OK] in [System Properties].
8
. The display will ask you to restart Windows, click [Yes].
The computer will reboot.
66