Panasonic CF-M32 Series - Manual (Page 27)

Panasonic Power Management Settings
The settings are the same for [AC] and for (Battery).
Setting
Function
Standard Power
Saving
User Setting
CPU Speed (%) 100 25 100, 75,50, 25, 12.5
Standby Timeout (min) 30 2 I, 2, 5, 10, 15, 30, Disable
Suspend Timeout (min) Disabled 10 1,2, 5, 10, 15,30, Disable
LCD Backiight Bright Power
Saving
B r i g h t , M e d i u m , D a r k ,
Power Saving
• Standby Timeout
Suspend Timeout
LCD Backlight
: When the computer is idle or a device is not ac­
cessed, the computer enters the standby mode af­
ter a preset interval of time.
When [USB Port] of [Supervisor Setup] is set to
[Enabled] in Setup Utility, this function is disabled.
: When the computer is idle or a device is not ac­
cessed, the computer enters the suspend mode af­
ter a preset interval of time.
When [USB Port] of [Supervisor Setup] is set to
[Enabled] in Setup Utility, this function is disabled.
: [Bright] [Medium] [Dark] [Power Saving]
Bright <------------- ---------------------> Dark
When installed in a network environment.
After resuming operation from the hibernation mode, the network connection may be
severed or the computer will not work properly.
When a device like a high-speed modem or ISDN terminal adapter is con­
nected to the serial port, etc., or if the infrared communications port is
being used for data transfer.
There are times when high-speed communication is adversely affected If the power
management function is enable. Please disable the power management function.
Key operation and music playback.
When the power management function is running, the keyboard and trackball opera­
tions may feel sluggish. Also, music may not play correctly when entering the standby
mode during operation.
27