Panasonic CF-M32 Series - Manual (Page 36)

Security Measures
When you do not want your computer to be used
without permission
Set the User Password.
Without the password, access to your computer is impossible.
When the user password is set
Upon entering your
User Password and
pressing (Enter)*
If the correct password is input,
Over three incorrect attempts.
^ Will Not starts
(Power off)
* If you are starting from the suspend mode ( q > page 18), if
after three attempts the correct password is not input, or if no
password is entered for about a minute, the computer returns
to the suspend mode.
SGttiny tho USGt pGSSWOrd (enabling, changing, disabling)
1
Run the Setup Utility (c^
page 73)
2
Using Q and QJ , select [System Setup] then press
[Enter]
3
Using Q and Q , select [User Password], then press
[Enterl
^ # To enable or change your password
1. Enter your password at the [Enter User Password], then press
[T],
2. Re-enter your password at the [Enter User Password Again).
(This is for confirmation purposes.)
3. Using O and
0
, select [Set User Password] then press [Enter] .
36