Make a copy of the cd-rom driver – Panasonic CF-M32 Series User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Make a copy of the CD-ROM driver
Copy the necessary drivers, from the floppy disk included with your CD-ROM
drive, to the Windows 95 CD-ROM Setup Boot Disk. It will be necessary to
edit the CONHG.SYS file and AUTOEXEC.BAT file on the Windows 95 CD-
ROM Setup Boot Disk. When editing the AUTOEXEC.BAT file, be careful
not to delete lines containing settings for CAB files to be copied to the C drive
on the hard disk.
Some CD-ROM drives require card managers (card and socket service). See
the manual included with your CD-ROM drive for further details.
(©afiiiuw}
It may take several minutes to reboot the computer.
Please store the floppy disks in a safe place. They will enable you to return
your computer to close to the condition at the time of purchase should any
problems occur.
Do not remove the floppy disk while the FDD indicator is on, power down
your computer or use the suspend or hibernation function.
When creating floppy disks, do not run any other application program.
When creating floppy disks and the message [Insufficient files to copy] is
displayed, click [OK] and then contact Panasonic Technical Support.
23